Appendix c. fast activation procedure, C.1 introduction, C.2 activation procedure – Mocomtech CDM-570 User Manual
Page 401: C.2.1 serial number
Appendix C. FAST ACTIVATION
PROCEDURE
C.1 Introduction
FAST is an enhancement feature available in Comtech EF Data products, enabling on-
location upgrade of the operating feature set—in the rack—without removing a modem
from the setup. This accelerated upgrade can be accomplished only because of FAST’s
extensive use of programmable devices incorporating Comtech EF Data-proprietary
signal processing techniques. These techniques allow the use of a unique access code to
enable configuration of the available hardware. The access code can be purchased at any
time from Comtech EF Data. Once obtained, the access code is loaded into the unit
through the front panel keyboard.
C.2 Activation
Procedure
C.2.1 Serial
Number
Obtain the Modem serial number as follows:
a. From the main menu, select Util, then FAST, then ENTER.
b. The Modem motherboard Serial Number is displayed on the bottom line
FAST:Cnfg View (H/W 0.03)
MainBoard S/N: 123456789
C–1