D.3.1 pc configuration, Rf or if – Mocomtech CDM-570 User Manual

Page 411

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 4

Appendix D

MN/CDM570L.IOM

D.3

Router Mode Point-to-Point System Configuration

The steps in this guide will lead to the following configuration:

PC 1

Satellite IP Modem (CDM-IP 1)

Ethernet Interface (fei0)

IP Address: 172.16.10.1

Mask: 255.255.255.0

10/100 BaseT

Ethernet Hub

RF or IF

PC 2

Satellite IP Modem (CDM-IP 2)

10/100 BaseT

Ethernet Hub

Ethernet Interface (fei0)

IP Address: 172.17.10.1

Mask: 255.255.255.0

IP Address: 172.16.10.11

Mask: 255.255.255.0

GW: 172.16.10.1

IP Address: 172.17.10.11

Mask: 255.255.255.0

GW: 172.17.10.1

Route Table

IP Destination Next Hop Type

172.17.10.0/24 0x02 To Sat

RX HDLC Address – 0x01

Route Table

IP Destination Next Hop Type

172.16.10.0/24 0x01 To Sat

RX HDLC Address

0x02

Figure D-3. Router Mode Point-to-Point System Configuration

D.3.1 PC

Configuration

Step Description

1

Set the IP address on PC 1 to 172.16.10.11, mask to 255.255.255.0. Set PC Gateway to
172.16.10.1

2

Set the IP address on PC 2 to 172.17.10.11, mask to 255.255.255.0. Set PC Gateway to
172.17.10.1

Reboot the PCs (if required).

D–7

Advertising
This manual is related to the following products: