Mocomtech CDM-570 - Manual (Page 437)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Appendix F MN/CDM570L.IOM
F.3.3.33 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS) RTC
(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS) RTC
(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS)RTC
Sync ODU RTC to Lcl RTC:
Yes No (
◄ ►, ENT)
The user is prompted to select either Yes or No, using the ◄ ► arrow keys, then to press
ENT. Selecting Yes will cause the CSAT Real Time Clock (RTC) to be synchronized
with the Modem RTC.
F.3.3.34 (ODU,ENABLE,1:1,CSAT#1) INFO (Information)
(ODU,ENABLE,1:1,CSAT#2) INFO (Information)
(ODU,ENABLE,STAND-ALONE) INFO (Information)
INFO: Model Transmitter
Receiver LNA Misc (◄ ►)
The operator uses this menu item to select enter 1 of 5 ‘Information Windows’. Use the
◄ ► arrow keys, then press ENT.
F.3.3.35 (ODU,ENABLE,1:1,CSAT#1,INFO) MODEL
(ODU,ENABLE,1:1,CSAT#2,INFO) MODEL
(ODU,ENABLE,STAND-ALONE,INFO) MODEL
CSAT-5060/010 V2.09
SERIAL # 00225 (ENT)
This window provides the CSAT Model Number and Serial Number, press ENT.
F.3.3.36 (ODU,ENABLE,1:1,CSAT#1,INFO) TRANSMITTER
(ODU,ENABLE,1:1,CSAT#2,INFO) TRANSMITTER
(ODU,ENABLE,STAND-ALONE,INFO) TRANSMITTER
Tx: ON 5845.0MHz 10.00dB
AMP:ON Unmuted Sl:0.0
This window provides the CSAT Transmitter information including transmitter status,
Tx Frequency, Tx Attenuation, Amplifier state, Tx Mute state and Tx Slope adjustment.
Press ENT.
F–13