F.3.4 kst2000a/b menus, F.3.4.1 (odu,enable) selections, F.3.4.2 (odu,enable) config (configuration) – Mocomtech CDM-570 User Manual

Page 442: F.3.4.3 (odu,enable,config) transmitter, F.3.4.4 (odu,enable,config,transmitter) frequency

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 4

Appendix F

MN/CDM570L.IOM

F.3.4

KST2000A/B Menus

F.3.4.1 (ODU,ENABLE)

Selections

KST SELECT: Config Info

Status (◄ ►,ENT)

The user is prompted to select 1 of 3 sub-menu branches using the ◄ ► keys, then press
ENT.

F.3.4.2

(ODU,ENABLE) CONFIG (Configuration)

KST CONFIG: Transmitter
Receiver Misc (
◄ ►,ENT)

The user uses this menu item to select either the ‘Transmitter configuration branch”,
“Receiver configuration branch” or “Misc configuration branch”. Use the ◄ ► keys,
then press ENT.

F.3.4.3 (ODU,ENABLE,CONFIG) TRANSMITTER

KST TX: Frequency Atten
Output HPA (
◄ ►,ENT)

This menu item is used to select which ODU Transmitter parameter is to be modified.
Use the ◄ ► keys, then press ENT.

F.3.4.4 (ODU,ENABLE,CONFIG,TRANSMITTER)

FREQUENCY

ODU Tx Frequency:
14500.0 MHz (

◄ ►,▲ ▼,

ENT)

The user is prompted to edit the transmit frequency. This is accomplished by selecting
the digit to be edited, using the ◄ ► keys. The value of the digit is then changed using
the ▲ ▼ keys. The user may then press ENT.

The frequency limits of the KST-2000A are known and the frequency values are
constrained accordingly.

F–18

Advertising
This manual is related to the following products: