Mocomtech CDM-570 - Manual (Page 51)

Page 15 of 54 MN/CDM570L.AA4 47
Param File Tag Values Associated with Parameter
Rt#0 …. Rt#nnn
Route table entries Rt#0 is the first entry and can go upto 256 entries.
[No need to read this from param file, use RTG]
ROUTE_HDLC_ADDR_SAVE Corresponding HDLC Addresses for EthernetÆSat entries. [No need to read this from param file, use RTG]
DHCP_RELAY_IP_ADDR
DHCP Server IP Address. Possible values are
NOT-DEFINED – When the parameter not set.
10.20.30.40 – When a DHCP Server IP Address is set.
REDUNDANCY_ACTIVE
Enabled
Disabled
BASE_BOOT_IMAGE
Possible values are
Latest
Image 1
Image 2
UPGRADE_SLOT
Oldest
Image 1
Image 2
BLINDLOAD_MCAST_ADDR
NOT-DEFINED when ip_addr is 0
Valid multicast IP address like 239.4.5.6
ADMIN_PWD
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
READWRITE_PWD
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
READONLY_PWD
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.