Param file tag, Values associated with parameter – Mocomtech CDM-570 User Manual

Page 52

Advertising
background image

Page 14 of 54

MN/CDM570L.AA4

Param File Tag

Values Associated with Parameter

ACCESS_CLIENT

NOT-DEFINED/NA – When not set
Valid IP address like 192.168.001.001/32

ACCESS_ENFORCEMENT_ENABLE

Enabled
Disabled

PING_REPLY_ENABLE

Enabled
Disabled

TELNETD_ENABLE

Enabled
Disabled

SNMP_ENABLE

Enabled
Disabled

IGMP_ENABLE

Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled

GENERIC_DOWNLINK_MCAST

Enabled
Disabled

QOS_ENABLE

Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled

TRANS_DES_ENABLE

Unavailable – If system does not has this FAST Feature available.
Per Route – If the system working mode is Router-Small, Router-Large, Router-PtoP
Enabled – If system working mode is EasyConnect
Disabled – If system working mode is EasyConnect

TX_HDR_COMPRESSION_ENABLE

Unavailable – If system does not has this FAST Feature available.
Per Route – If the system working mode is Router-Small, Router-Large, Router-PtoP
Enabled – If system working mode is EasyConnect
Disabled – If system working mode is EasyConnect

Advertising
This manual is related to the following products: