Mocomtech CDM-570 - Manual (Page 117)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Physical Description MN/CDM570L.IOM
4.3.10 10/100 BaseT Ethernet management port connector (M&C)
This is a standard RJ45 receptacle for connecting UTP cable to an Ethernet hub, router,
switch, PC, etc. Used for upgrading CDM-570L base modem firmware.
4.3.11 10/100 BaseT Ethernet Traffic Port Connector
(Traffic, with Optional IP Module)
This is a standard RJ45 receptacle for connecting UTP cable to an Ethernet hub, router,
switch, PC, etc. Used for Ethernet traffic, management of CDM-570L and IP Module
functions via Telnet/HTTP/SNMP, upgrading of CDM-570L IP Module software.
4.3.12 Serial Console Port (Console, with Optional IP Module)
This is an RJ11 6-pin ASYNC RS-232 serial console port used for management of
CDM-570L and IP Module functions using a terminal emulator connected to the Console
port with supplied adaptor cable.
4–5