Mocomtech CDM-570 - Manual (Page 408)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Appendix D MN/CDM570L.IOM
Note: Any CDM-IP configuration changes need to be saved to permanent storage by selecting [S]
from any menu screen and then typing [y] to save.
D.1.6 Restoring Factory Default Configuration
The following sections in this guide assume that the CDM-IP is still in factory default
configuration for IP. If that’ is not the case, the factory default configuration can be
restored from the menu:
Step Description
1 From the Main Menu, select Operations and Maintenance sub-menu [O].
2 From the Operations and Maintenance menu, select Database Operations sub-menu
[D].
3 From the Database Operations menu, select Restore Factory Default option [R].
4 Confirm when prompted by typing ‘yes’ when the following prompt is displayed:
Are you sure you want to restore factory default settings?
WARNING: Choosing Yes will restore factory defaults and then
reboot..
This will erase any user configuration and restore the CDM-IP to factory default
configuration. Proceed to Section D.2 to perform the easyConnect
™ Mode configuration
or to Section D.3 to perform the Router Mode configuration.
D–4