F.3.5 (odu,enable) status – Mocomtech CDM-570 User Manual

Page 448

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 4

Appendix F

MN/CDM570L.IOM

F.3.5

(ODU,ENABLE) STATUS

STATUS:PS:OK RF:OK UC:OK
LNA:OK AG:OK HP:OK DC:OK


This menu displays summary information. The operator may select 1 of 6 detailed status
windows. Use the ◄ ► keys, then press ENT.

The cursor may be moved over 6 of the 7 status parameters to view more detailed status
information. These screens are continually updated while being viewed.

AG

= AGC Status

DC

= Down Converter

HP

= HPA Status

LNA

= Low Noise Amplifier (No further detail)

PS

= Power Supplies

RF

= Reference

UC

= Up Converter

FT =

Fault

NA

= Not Applicable

OK

= OK – No Fault

P/Supplies: 7V:OK 17V:OK
-7V:OK 12V:OK

REF:WARM 72M:OK RANGE:NA
SRC:INT XLK:NA PHASE:NA

UPCONV STATUS: OVRTMP:OK

SSYN:OK KSYN:OK PRG:OK

AGC STATUS: EIP:OK

LOOP:OK IIP:OK

HPA: OVERTMP:OK 9.75V:OK
-5V:OK BIAS:OK PRG:OK

DNCONV STATUS: OVRTMP:OK
LSYN:OK KSYN:OK PRG:OK



F–24

Advertising
This manual is related to the following products: