Minicom Advanced Systems Minicom Smart 216 - Manual (Page 15)

USER GUIDE
14
3. Type the default Administrator user name - admin - and password - access -
(both lower case).
4. Press Enter. The web interface opens at the Targets page. See Figure 14.
5. Bookmark the page for easy reference.
Figure 14 Targets page
By default an Administrator can access all connected Targets, so they all appear on
the Targets page.
Columns:
Server name - The server name can be changed in the configuration settings to
give the server an identifiable name.
Server Status - Server Status can be on, off or busy (i.e. another user is accessing
the server).
User – The current user (if any) accessing the Target.
11.3 Connecting to a Target server
To connect to a Target you click the desired Target in the Server Name
Column. The screen of the Target appears side the remote console. Section
26 on page 28 explains how to conduct a remote session. The sections below
first explain how to configure the system.