Minicom Advanced Systems Minicom Smart 216 - Manual (Page 16)

SMART 216 / 232 IP
15
12. Configuring the system
Configure the system includes setting network parameters, user and security
settings and maintenance.
From the menu, click Configuration. The Network >Configuration page appears,
see Figure 15.
Figure 15 Network >Configuration page
12.1 Network > Configuration
Consult your Network Administrator for the network settings.
Device name - Type a name for the Smart 216 / 232 IP.
TCP Port - Choose any TCP port from port #800 to 65535. (When managed by
KVM.net
®
II or AccessIT, the port number can be changed from the management
interface if needed).
Notes
Firewall or router security access list must enable inbound communication through
the selected TCP port for the Smart 216 / 232 IP’s IP address.
For Client computer access from a secured LAN, the selected port should be open
for outbound communication.
12.1.1 LAN
In the LAN section – see Figure 15 – is the following:
Enable DHCP – When a DHCP server is active on the same network to which
Smart 216 / 232 IP is connected, DHCP provides automatic IP assignment.