Minicom Advanced Systems Minicom Smart 216 - Manual (Page 17)

USER GUIDE
16
When DHCP is disabled – (Recommended) – You can assign a fixed IP address to
the Smart 216 / 232 IP.
Consult your Network Administrator regarding the use of the DHCP.
When DHCP is disabled, enter the IP Address, Subnet Mask, and Default
Gateway for LAN, as given by your Network Administrator.
These parameters can be configured locally from the OSD as explained on page 12.
12.1.2 KVM.net
Note! Any reference to KVM.net equally refers to AccessIT.
KVM.net is a centralized IP based system for secure control of servers and network
devices, power and user administration in the data center environment. KVM.net
combines Out-Of-Band, KVM via IP access with modern IT standards and
requirements. It is the most comprehensive remote server maintenance solution
available in the market today. The system also work with AccessIT
Enable KVM.net - Check this option to allow Smart 216 / 232 IP unit to be
remotely managed by Minicom’s KVM.net system.
Manager Auto Discovery – when checked, KVM.net automatically detects the
Smart 216 / 232 IP, if it resides on the same network segment.
Manager IP – If Smart 216 / 232 IP resides on a different segment, type the static
IP address of the KVM.net Manager. (We advise typing the static IP address of the
KVM.net Manager even if the Smart 216 / 232 IP resides on the same network
segment as the KVM.net Manager).