Minicom Advanced Systems Minicom Smart 216 - Manual (Page 23)

USER GUIDE
22
17. Administration > User Targets
By default access is allowed to all servers for administrators. For other users,
define the access rights of each user separately.
To do so:
1. From the menu click User Targets. The User Targets Configuration window
appears, see Figure 20.
Figure 20 User Targets Configuration
2. Select a user from the User drop-down menu.
3. Check the Target servers the user can access (according to his access
permissions). To select all Target servers, press .
4. Click Apply, the selection is saved.
5. Repeat the above steps for other users.