Minicom Advanced Systems Minicom Smart 216 - Manual (Page 45)

USER GUIDE
44
In the Settings window you can do the following:
Changing the Network parameters
DHCP Enable – When a DHCP server is active on the same network to which
Smart 216 / 232 IP is connected, DHCP provides automatic IP assignment.
When DHCP is disabled – (Recommended) – You can assign a fixed IP address to
the Smart 216 / 232 IP.
Consult your Network Administrator regarding the use of the DHCP.
When DHCP is disabled, enter the IP Address, Subnet Mask, and Gateway as
given by your Network Administrator.
(Network parameters can also be changed from the remote GUI as explained on
page 15).
KVM.NET MNG – Press the spacebar to toggle between enabling and disabling
KVM.net/AccessIT management. When enabled the Smart 216 / 232 IP unit is
remotely managed by Minicom’s KVM.net/AccessIT system.
KVM.NET ADD – Here you can change the static IP address of the
KVM.net/AccessIT Manager.
HOT KEY – By pressing Shift, Shift the OSD appears. You can replace Shift,
Shift with any of the following:
· Ctrl, Ctrl
· Ctrl, F11
· Print Screen
Press the Spacebar to toggle between options. To display the OSD in future press
the new hotkey.
KEYBOARD LANGUAGE – This refers to the OSD keyboard language and not
the computer keyboard language. Press the Spacebar to toggle between the
language options. It can be changed to French or German.
29.7 DDC – F10
Display Data Channel (DDC) is a VESA standard for communication between a
monitor and a video adapter.
The ROC emulates the DDC information to the connected computer.
To emulate the DDC information of the monitor connected to the Smart 216 / 232
IP switch into the memories of all connected ROCs when first installing system.