Meridian America Digital Active Subwoofer D2500 User Manual

D2500, Meridian d2500, Technical specification

Advertising
background image

Meridian D2500

The Meridian D2500 is big brother to the D1500 - the worlds First Digital Active
Subwoofer. This 200-Watt design uses dual 250mm drivers to provide more of
the same extreme deep, clear and controlled bass that the D1500 is known for.
It too employs 96kHz/ 24bit digital to analogue conversion and accepts digital
inputs up to 96kHz including those carrying MHR signals.
Separate analogue and digital power supplies are used to feed the D2500’s
precision electronic circuits ensuring that both high and low power sections
receive continually smooth supply.
Fully shielded for use close to monitors and televisions Meridian subwoofers are
constructed from 22mm MDF and are fully braced and damped. They are then
finished with a 6mm annealed plate glass top and are supplied with feet and
castors so as they can be installed on any floor type.
The input and output connectors on the back panel of the D2500 allow it to be
easily daisy chained should you require multiple subwoofers. It also features
Meridian Comms connections so as when installed in a Meridian Digital Theatre it
works seamlessly with other Meridian products.
Meridian subwoofers come supplied with an SY5-lead to make Meridian Comms
connection easier.

Technical Specification

Performance:

Frequency response within 3dB from 30Hz to 400Hz (Bypass)

Switchable 2nd order Butterworth crossover with settings for
Flat, DSP5000 compatible or DSP33/ M33 compatible
Output >110dB spl @ 1m

Noise and Hum <-72dBm

Distortion <0.1%, typically less than 0,02% up to full power at
all relevant frequencies

Inputs:

Two cable digital inputs, 75Ù, up to 96kHz, PCM or MHR
encoding

Construction: Acoustic-suspension digital active loudspeaker

Two 250mm high-efficiency long-throw custom driver

Veneered MDF braced and damped, in black with 6mm
annealed plate glass top

Supplied with castors and spikes
Complementary high-efficiency bipolar design, with output-
stage error correction and twin feedback loop
200W mean power continuous

Optimised magnetic design

Dimensions:

788mm (31.1in) W, 416 (16.4) H, 440 (17.3) D without supplied
feet or castors. Weight 62kg (137lb)

D2500

Digital Active Subwoofer


Sales information – 21

st

August 2001

Dual driver acoustic-suspension
active loudspeaker

Takes digital inputs up to 96kHz
and supports MHR

One 200W high-efficiency power
amplifier

User control over input,
sensitivity and crossover
frequency

Analogue version (M2500)
available has line level balanced
& unbalanced inputs





Meridian Audio Limited
Stonehill, Stukeley Meadows
Huntingdon
Cambridgeshire PE29 6EX

T +44 (0) 1480 52144
F +44 (0) 1480 459934


Meridian America Inc.
Suite 122, Building 2400
3800 Camp Creek Parkway
Atlanta GA 30331

T (404) 344 7111
F (404) 346 7111

www.meridian-audio.com



MSR included
for scale

Advertising