Momentum Sales & Marketing Momentum Data Systems PCI-1500 - Manual

RJ-45
EJTAG
Boot
Flash
(socketed)
PHY
64 MB
200MHz DDR RAM
RS232
I 2 C
IR Rx
1
2
7
8
audio
out 2-8
I 2 C
I 2 C
I 2 C
DVI-I
I 2 C
I 2 C
IR out
pushbuttons
LEDs
Video
Decoder
SAA7118
Stereo Audio
PCM1802
SPI0
Video
Encoder
SAA7105
DVI
VGA
I 2 C
Repeater
Ext. Mem
PCI
-
XIO
32
32
PCI
Component Video In
S-vid
CVBS
audio in
S/PDIF in
Video In
I,H port
16
AI_SD0
AI_SD1,2,3
SPDI
Video Out
16
SPDO
AO_SD0-3
Data
SPI ctrl
8
16
12
S-vid
CVBS
32
audio out
JTAG
MII
S/PDIF
Out
I 2 C Controller
10/100
ethernet
GPIO 11-14
expansion
GPIO
pnx1500
A/V Expansion
GPIO[34:27]
8
Octal
D/A
DSD1608
The PCI-1500 is a cost effective hardware platform for the
development of pnx1500 software where the PC is used as
the I/O subsystem during development.
The 266 MHz Philips NEXPERIA™ pnx1500 (formerly called
the TriMedia) is programmed in C/C++ and supported by
library functions including audio and video compression,
video processing and text/graphics overlay generation. The
dual que built in Ethernet makes the pnx1500 ideal for high
performance multi-media network applications that need
QoS for real-time operation. To support that, FUSION ® and
TargetTCP ® TCP/IP protocol suites are available for use with
the pnx1500.
The card is also available with the Philips MPTK tools
(formerly NDK) for compilation and debugging.
To help you get started, MDS offers NEXPERIA training
classes to minimize the learning curve and engineering
services help you get your application into production
quickly.
Hardware Features
• All major pnx1500 peripheral interfaces implemented,
including Ethernet
• CVBS, S-video, and component video input, CVBS, S-
video, DVI-I (component video and digital) output allows
operation with almost any video source and display
• 2 channel analog audio in, 8 channel analog audio out
supports 96 kHz sample rates
• S/P DIF input and outputs for digital audio
• Ethernet with optional FUSION ® or TargetTCP ® Protocol
Suite allows development of embedded applications
directly from your PC
• RS232 port allow control of external 'dumb' devices or as
a debug interface
• 64MB of 200 MHz DDR memory (DDR400)
• Infra-red receiver and transmitter
• Controlled impedance expansion connector for daughter
card with custom A/V input or output, compatible with
cards developed for MDS IREF (pnx1300) boards.
PCI-1500
DRAFT