Minicom Advanced Systems SMART 232 - Manual (Page 16)

SMART 216 / 232
15
When DHCP is disabled – (Recommended) – You can assign a fixed IP address to
the Smart 216.
Consult your Network Administrator regarding the use of the DHCP.
When DHCP is disabled, enter the IP Address, Subnet Mask, and Default
Gateway for LAN, as given by your Network Administrator.
These parameters can be configured locally from the OSD as explained on page 11.
11.2 Administration > User Settings
From the menu click User Settings, Figure 15 appears.
Figure 15 User Settings
On this page an Administrator creates or deletes users.
There are 3 levels of user access:
•
Administrator
•
User
•
View only
Administrator
An Administrator has unrestricted access to all windows and settings. An
Administrator can change the name and password and server access permissions of
all users.