Minicom Advanced Systems SMART 232 - Manual (Page 24)

SMART 216 / 232
23
To restore factory settings:
1. From the menu select Restore Factory Settings. Restore Factory Settings
appears see Figure 23.
Figure 23 Restore factory settings
2. Check the box if you want to preserve Network settings.
3. Click . The unit restarts.
18. Set Time & Date
The time and date set is used when recording log events (see page 25).
To set the time and date:
From the menu, select Time & Date, Figure 24 appears.
Figure 24 Set Time & Date
Type the appropriate parameters and click click .