Philips Magnavox 32MD350B - Manual (Page 16)

16
EN
P
REPARATION
[PC Connection]
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cable as well.
If you connect this unit to your PC, you can use this unit as a PC monitor.
37MD350B only
DVI OUT
The following signals can be displayed:
Format Resolution Refresh rate Format Resolution Refresh rate
VGA 640 x 480 60Hz
WXGA
1,280 x 768 60Hz
SVGA 800 x 600 60Hz
1,360 x 768 60Hz
XGA 1,024 x 768 60Hz
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
5 5 Cable5Management
Keep the cables through this holder to avoid tangle
them.
5 5 Plug5In5the5AC5Power5Cord
Make sure that the AC power cord must be plugged
to an AC outlet after all the necessary connections are
completed.
Caution:
• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of
this range may result in fire or electrical shocks.
Note:
• Each time you plugged in the AC power cord, any operations
will not be performed for a few seconds.
This is not a malfunction.
* For 32MD350B, nonremovable AC power cord is already
fixed on the unit.
37MD350B
32MD350B
stereo mini plug
conversion cable
HDMI-DVI
conversion cable
rear of this unit
To HDMI1
Input jack only
HDMI-DVI conversion cable
should be with ferrite core.
e.g.)
personal computer
rear of this unit
AC power cord
AC outlet
rear of this unit
rear of this unit