Motorola T5410 - Manual (Page 23)

19
Ac
cessories
To Set the Call Tone
•
With the radio on, press \ until E appears in the upper right portion of
the display.
Current Call Tone setting
0 - 5 , will begin to flash.
• Press [ and ] to change and hear Call Tone while flashing.
• Press \ or
M
to set new Call Tone.
Roger Beep/Talk Confirmation Tone
When you turn on this feature, your two-way radio transmits a unique tone when you
finish transmitting. It’s like saying “Roger” or “Over” and lets others know you’re
finished talking.
•
To enable Roger Beep/Talk Confirmation Tone, press and hold ] as you turn
your radio On. Now, when you release the M button, your set tone lets your
friends know you’re finished talking and ! will appear on the display.
• To disable the Talk Confirmation Tone feature, turn your radio Off and then back
On while pressing and holding
] .
Accessories
To Use Audio Accessories
1. Make sure radio is Off. Open cover and plug accessory connector into jack.
2. Turn radio On and lower volume before placing accessory on head or in ear.
3. Press
J or Q while rotating P to adjust volume for comfort level.
4. To transmit, press
M
and speak into accessory microphone (if any).
5. To receive, release
M
.
6864110r10o.book Page 19 Friday, December 21, 2001 11:55 AM