Dream Multimedia Dreambox DM 7025 - Manual (Page 58)

- 58 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
english
10.6 LCD Setup
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select.
Navigate to the option “System” and press the OK-
Button.
The “System” menu will open up.
Navigate to the option “LCD Setup…” and press the
OK-Button.
Using the Navigation-Buttons left and right you
can set the brightness and contrast of the LCD.
“Standby” set the brightness value for standby.
If “Invert” is set to “Yes” the polarity of the LCD will
change.
All changes will take effect immediately.
Press the green Options-Button to save the setting
or the red Options-Button to discard them.
You are taken back to the “System“ menu.