ICP DAS USA DB25 - Manual (Page 10)

Creating Project Files
4
C
REATING
A P
ROJECT
F
ILE
To create a project file, move the highlighted bar to the “PROJECT” heading and press the computer’s
ENTER key. When the menu appears move the highlight bar to the “NEW” sub-heading and press
“PROJECT”
Menu
the computer’s ENTER key. At the “Project Name” entry area, type in your file name.
Enter your
Project’s
File Name
After entering in the project’s file name, press the ENTER key. The highlighted bar now moves to
“Project Type”. Press ENTER to open the “Project Type” window (default setting is “DeviceNet to
PLCs or Devices”). Move the highlight bar by pressing the DOWN arrow key to the project type you
wish to configure and then press the ENTER key. The software enters this selection and returns to the
“PROJECT” menu.