ICP DAS USA DB25 - Manual (Page 56)

Application Notes – PLCs and Devices
50
I
DEC
M
ICRO
-3 PLC
S
Registers Accessed
The DN-3000 will only access registers in the Data Register Area of PLC memory (D0 to D9999). When
entering register numbers, only the offset into this area (0-9999) should be entered. For example, to
access register number D1, the value 1 should be entered. To access register number D9999, the value
9999 should be entered.
Link Adapter Requirement
The DN-3000 requires an Idec Link Adapter or equivalent to be used when communicating with any of
the FA Series PLCs.
I
DEC
FA S
ERIES
PLC
S
Registers Accessed
The DN-3000 will only access registers in the Data Register Area of PLC memory (D0 to D9999). When
entering register numbers, only the offset into this area (0-9999) should be entered. For example, to
access register number D1, the value 1 should be entered. To access register number D9999, the value
9999 should be entered.
Link Adapter Requirement
The DN-3000 requires an Idec Link Adapter or equivalent to be used when communicating with any of
the FA Series PLCs.