Installing internal drives in bays 1, 2, 3 and 4 – IBM A40 TYPE 6840 User Manual
Page 23
1
Bay 1 - Max Height:
41.3 mm (1.6 in.)
CD-ROM drive (standard in some models)
5.25-inch hard disk drive
2
Bay 2 - Max Height:
41.3 mm (1.6 in.)
5.25-inch hard disk drive
3.5-inch hard disk drive (requires a mounting bracket)
CD-ROM drive
DVD-ROM drive
3
Bay 3 - Max Height:
25.4 mm (1.0 in.)
3.5-inch diskette drive
4
Bay 4 - Max Height:
25.4 mm (1.0 in.)
Hard disk drive
3.5-inch removable drive
5
Bay 5 - Max Height:
25.4 mm (1.0 in.)
Hard disk drive
6
Bay 6 - Max Height:
25.4 mm (1.0 in.)
Hard disk drive
7
Bay 7 - Max Height:
25.4 mm (1.0 in.)
Hard disk drive
Installing internal drives in bays 1, 2, 3 and 4
1.
Remove the cover (see “Removing the cover” on page 15).
2.
If the drive you are installing is a removable-media drive, remove the bay
panel from the front bezel.
3.
Insert a flat–bladed screwdriver into one of the slots on the static shield in the
drive bay into which you are installing the drive and gently pry the static
shield loose from the drive bay.
Chapter 4. Installing Options
17