Leds, How to open and to close the drum – Indesit WITL 86 User Manual

Page 5

Advertising
background image

5

GB

Service

Tr

oubleshooting

Precautions

C

ar

e

Programmes

Detergents

Installation

Description

Cycle phase under way:

During the wash cycle, the LEDs gradually illumi-

nate on to indicate the cycle phase under way:

Prewash

Wash

Rinse

Spin cycle

Note: during draining, the LED corresponding to

the Spin cycle phase will be turned on.

Function buttons

The FUNCTION BUTTONS also act like LEDS.

When a function is selected, the corresponding

button is illuminated.

If the function selected is incompatible with the

programme set, the button will flash and the function

will not be enabled.

If you set a function that is incompatible with another

function you selected previously, only the last one

selected will be enabled.

Leds

The LEDS provide important information.

This is what they can tell you:
Delay set:

If the Delay Timer function has been enabled (see

page. 7), once you have started the programme,

the LED corresponding to the delay set will begin to

flash:

As time passes, the remaining delay will be

displayed, and the corresponding LED will flash:

Once the set delay is complete, the flashing LED will

turn off and the programme set will start.

Fig. 3

Fig. 4

Fig. 1

Fig. 2

A) Opening (Fig. 1).

Lift the external lid and open it completely.

B) Opening the drum (Soft opening):
With one finger, push the button indicated in fig. 2

and the drum will open delicately.

C) Loading the washing machine. (Fig. 3).

D) Shutting (Fig. 4).

- close the drum fully by first shutting the front door

followed by the rear one;

- then ensure the hooks on the front door are perfectly

housed within the seat of the rear door;

- after the hooks have clicked into position, press both

doors lightly downwards to make sure they do not

come loose;

- finally shut the external lid.

How to open and to close the drum

Advertising