Personalisations, Setting the temperature, Setting the spin speed – Indesit WITL 86 User Manual

Page 7: Functions

Advertising
background image

7

GB

Service

Tr

oubleshooting

Precautions

C

ar

e

Programmes

Detergents

Installation

Description

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).

The temperature can be lowered, or even set to a cold wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.

The maximum spin speeds for each programme are as follows:
Programmes

Maximum spin speed

Cottone

800 rpm

Synthetics

800 rpm

Wool

600 rpm

Silk

no

The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol .

The washing machine will automatically prevent you from selecting a spin speed higher than the maximum

speed for each programme.



To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by

continuously rotating the drum at a speed which is slightly faster than the normal washing speed.

When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than

the set frequency.

If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.

The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the

programme set.

C

Option

Effect

Comments

Enabled with

programmes:

Delay

Timer

Delays the start

of the wash by

up to 24 hours.

Pess the button repeatedly until the LED corresponding to the

desired delay is turned on. The fifth time the button is pressed, the

function will be disabled.

N.B.: Once you have pressed the Start/Reset button, the delay can

only be decreased if you wish to modify it.

All

Bleaching

Bleaching cycle

designed to

remove the

toughest stains.

Please remember to pour the bleach into extra compartment 4

(see page 8). This option is incompatible with the EASY IRON

option.

2, 3, 4, 5,

Rinse cycles.

Easy iron

This option

reduces the

amount of

creasing on

fabrics, making

them easier to

iron.

If you set this option, programmes 4, 5, 6, 7 and Delicate Rinse

will be suspended, leaving the laundry to soak (Anti-crease) and

icon will flash:

- to conclude the cycle, press the START/RESET button;

- to run the draining cycle alone, set the knob to the relative

symbol and press the START/RESET button.

This option is incompatible with the BLEACHING option.

3, 4, 5, 6, 7,

8, 9, 10 and

Rinse cycles

Extra Rinse Increases the

efficiency of the

rinse.

Recommended when the appliance has a full load or with large

quantities of detergent.

1, 2, 3, 4, 5,

8, 9, 10, 12,

13 and Rinse

cycles.

Advertising