IBM THINKCENTRE 8141 - Manual (Page 23)

Removing and replacing a PCI adapter
Attention
Do not open your computer or attempt any repair before reading the
“Important safety information” in the Quick Reference that was included with
your computer. If you no longer have this copy of the Quick Reference , you
can obtain one online from the IBM Web site at
http://www.ibm.com/pc/support.
This section provides instructions on how to remove and replace a PCI adapter.
1. Remove the cover. See “Removing the cover” on page 1.
2. Rotate the drive bay assembly upward to gain access to the system board.
* X XXX X XX XX* * X XXX X XX XX*
3. Open the adapter latch and remove the failing adapter.
* X XXX X XX XX* * X XXX X XX XX*
4. Remove the new adapter from its static-protective package.
Replacing customer replaceable units (CRUs) 15