IBM R31 - Manual (Page 34)

3. The main screen displays as below:
4. Using the up or down arrow key, select Password.
5. Press the Enter key.
The following submenu is displayed:
* Power-On password
* Supervisor password
* Lock BIOS setting
* Hard disk x password
6. Select Power-On password and press Enter .
7. Type in correct SVP at ″Enter Current Password″
and press Enter.
8. PressEnter at ″Enter New Password″.
9. Press Enter at ″Confirm New Password″.
10. Press Enter in the Changes have been saved
window.
11. Press F10; then select Yes in the Setup confirmation
window.
Hard disk password
The hard disk password is a security feature that is used
to protect the hard disk data from unauthorized access.
Attention: If the hard disk password is forgotten, IBM
does not provide any services to reset the hard drive
password nor recover data from the hard drive. The hard
drive can be replaced for a scheduled fee.
Power management features
Power management modes are available in the computer
system to reduce power consumption and to prolong
battery life.
28 ThinkPad R30/R31 HMM