Insignia NS-HTIB51A - Manual (Page 27)

23
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
Setting up HDMI (HDMI Setup menu)
Audio TV OUT (Audio TV Out submenu)
This setting determines whether audio received by
HDMI IN is output by the HDMI OUT. You may want
to turn this preference on if your TV is connected to
the HDMI OUT and you want to listen to the audio
from a component that’s connected to an HDMI IN,
through your TV’s speakers. Normally, this should
be set to Off.
LipSync (LipSync submenu)
Lets you set the receiver to automatically correct
any delay between the video and the audio, based
on the data from the connected monitor.
CEC Function (HDMI Control submenu)
This function lets CEC-compatible components
connected via HDMI to be controlled by the
receiver.
Audio Return Ch (ARC)(Audio Return Ch submenu)
The audio return channel (ARC) function enables an
HDMI 1.4-capable TV to send the audio stream to
the HDMI OUT jack of the receiver. To use this
function, you must select the TV/CD input and your
TV must support the ARC function.
Power Control (Power Control submenu)
To link the power functions of CEC-compatible
components connected via HDMI, select On. This is
set to On automatically when HDMI Control is set
to On first time.
Notes
• Two different inputs cannot have the same
name.
• This menu cannot be used for the TUNER input
selector.
Submenu Configuration
Audio TV OUT
Off (default)–HDMI audio is not output.
On–HDMI audio is output.
LipSync
Disable (default)–HDMI lip sync disabled.
Enable–HDMI lip sync enabled.
CEC Function
Off (default)–CEC disabled.
On–CEC enabled.
Audio Return Ch (ARC)
Off–Select if you don’t want to use audio return
channel (ARC) function.
Auto (default)–The audio signal from your TV tuner
can be sent digitally to the HDMI OUT of the receiver.
Power Control
Off–Power Control disabled.
On (default)–Power Control enabled.
TV Control
Off–TV Control disabled.
On (default)–TV Control enabled.
Notes
• If On is selected and the signal can be output by
the TV, the receiver outputs no sound through
its speakers.
• If On is selected, TV Sp On appears on the
display when you press DISPLAY.
• When TV Control is set to On, this setting
default is Auto.
• With some TVs and input signals, no sound may
be output, even when this setting is On.
• When the Audio TV OUT or TV Control are set
to On, and you are listening through your TV’s
speakers, if you turn up the receiver’s volume
control, the sound is output by the receiver’s
front left and right speakers. To stop the
receiver’s speakers from producing sound,
change the settings, change your TV’s settings,
or turn down the receiver’s volume.
Notes
• This function only works if your
HDMI-compatible TV supports HDMI Lip Sync.
• You can check the amount of delay being
applied by the HDMI Lip Sync function on the
A/V Sync screen.
Notes
• When set to On, the name of connected
CEC-compatible components and CEC On are
displayed on the receiver when the menu is
closed.
• When set to Off, CEC Off is displayed on the
receiver when the menu is closed.
• When a CEC-compatible component is
connected to the receiver via HDMI cable, the
name of the connected component is displayed
on the receiver. For example, when you are
watching TV, if you turn on a Blu-ray Disc/DVD
player by the receiver’s remote control, the
name of the Blu-ray Disc/DVD player is
displayed on the receiver.
• Set to Off when a connected piece of
equipment is not compatible or it is unclear
whether the equipment is compatible or not.
• If movement is unnatural when set to On,
change the setting to Off.
• Refer to the connected component’s instruction
manual for details.
Notes
• The Audio Return Ch setting can only be set
when HDMI Control is On.
• This setting is set to Auto automatically when
HDMI Control is set to On first time.
Notes
• The Power Control can only be set when the
HDMI Control setting is On.
• HDMI power control only works with
CEC-compatible components that support it
and may not work with some components.
• When set to On, power consumption increases.
• When set to On, regardless of whether the
receiver is On or in Standby, both audio and
video stream from an HDMI input is output to
the TV or other components via HDMI
connection (HDMI pass-through function).
When the HDMI pass-through function activates
in standby mode, the HDMI THRU indicator
lights.
• The power consumption during standby mode
increases during the HDMI pass-through,
however when the TV is in standby mode or you
are watching a TV program, power
consumption can be improved.
• Refer to the connected component’s instruction
manual for details.
NS-HTIB51A_10-0114_MAN_.book Page 23 Tuesday, April 13, 2010 10:19 AM