Insignia NS-BRDVD4 - Manual (Page 14)

14
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
Connecting a TV using an A/V cable (good)
To connect a TV using an AV cable:
• Connect an A/V cable to the VIDEO and AUDIO L/R jacks on
the back of your player and to the VIDEO IN and AUDIO IN L/R
jack on the TV. Jacks and cable connectors are usually
color-coded. Make sure that you match the colors.
Connecting audio to an amplifier or home theater system
To connect audio to an analog amplifier:
• Connect an audio cable to the AUDIO L/R jacks on the back of
your player and to the AUDIO IN L/R jacks on the receiver.
To connect audio to a digital amplifier or home theater system:
• Connect a digital optical cable from the OPTICAL DIGITAL OUT
jack on the back of your player to the OPTICAL DIGITAL IN jack
on the receiver.
- Or -
Note
The A/V cable can only send standard-definition video (480i) to
your TV.
Yellow=Video
White=Left audio
Red=Right audio
TV
Back of player
Analog audio receiver
Audio cable
Back of player
NS-BRDVD4-BRDVD4-CA_10-0864_MAN_V6.fm Page 14 Monday, October 24, 2011 5:16 PM