ICP DAS USA IM-100 - Manual (Page 21)

2
0
ra
Item IM-3
Hardware Reference
2.1 MAVIS IM-30/IM-10
2.1.1 Came Specification
0 IM-100
Image sensor 1/2” CMOS S 3, Pi ensor Micron MT9V40 xel size: 9.9um x 9.9um
Video output p 0(V) ixels 640(H) x 48
Gain control 0 ~ 1 nic 2dB setting via commu ation command
Power supply +1 via 2VDC normal (Supply 1394 cable)
Power consum 12 ption Max. ~ 1.7W at V
Acquisition m (expo ble ), External random trigger ode Free Run sure time programma
Connector Inte 6-Pin or v
0-Pin G ose Inpu
rface
1
IEEE 1394 connector(f
PIO (General Purp
ideo and power)
t/Output)connector
GPIO connecto TL level tput and r T with 2 input, 4 ou one +5VDC output
Video mode Initial mode: 640 x 480 at 30fps Initial mode: 640 x 480 at 100fps
Scalable mode: by AOI Scalable mode: by AOI
Protocol IEEE 1394a version. 1.31 (transfer speed 400Mbps)
Test image Gray value internal test pattern generated
Exposure Time Programmable via IEEE 1394 bus
Brightness Programmable via IEEE 1394 bus
Temperature Operating temperature : 0℃ ~ 50℃ (32℉ ~ 122℉)
Storage temperature: -20℃ ~ 60℃ (-4℉ ~ 140℉)
Humidity Operating humidity : 20% ~ 80%, relative, non-condensing
Storage humidity: 10% ~ 90%, relative, non-condensing
EMC condition CE/FCC
Dimension 72.5mm (H) x 49mm(W) x 36.7mm(D) without Lens
Weight 120g without Lens
Lens Adaptor C/CS Mount
- 21 -