ICP DAS USA IM-100 - Manual (Page 25)

3 In
MAV perat ok
system platforms. This also installation gui
camera correctly and safely. Please read through this inst and
follow the installation steps of your specified system platform.
CAUTION
stallation Guide
IS IM-30/IM100 IEEE 1394 cameras support o ion in IPC, PC and Notebo
de includes information on how to use this
allation guide carefully
DO NOT open the ing in any situation. Touching internal
y d n. Meanwhile when customer to open
ousing then ely.
camera hous
components ma amage camera functio
camera h warranty will be void immediat
Be careful not to a etallic material inside of the camera. llow liquids, flammable or m
3.1 Hardw Installation
3.1.1 IPC/PC Platform
z Some desktop PCs have a built-in 1394 port with 6-pin 1394 connector;
if your system is one of these, you will be able to use a 1394 cable
connect to your system 1394 port directly.
z If you choose to use an IPC or your desktop PC without a built-in 1394
port, then please see the following steps to install your 1394 interface
card on a PCI bus:
(1) Remove the computer cover using the instructions from the
computer manual.
(2) Check that there is an empty PCI (32-bit) slot to accommodate the
card.
(3) Remove the blank metal plate located at the back of the selected
slot (if any). Keep the removed screw to fasten the 1394 card after
installation.
(4) Carefully position the 1394 card in the selected PCI slot as
illustrated below. If using a tower computer, orient the board to suit
the board slots.
are
- 25 -