Removing and replacing the front bezel, Replacing the power supply, Removing – IBM THINKCENTRE 8123 User Manual

Page 16: Replacing, Front, Bezel, Power, Supply

Advertising

background image

Removing

and

replacing

the

front

bezel

1.

Remove

the

computer

cover.

See

2.

To

release

the

front

bezel

from

the

chassis,

press

downward

on

the

two

plastic

tabs

1

and

push

the

bezel

outward

as

shown.

3.

To

reinstall

the

bezel,

align

the

plastic

tabs

1

on

the

bottom

of

the

bezel

with

the

corresponding

holes

in

the

chassis,

then

snap

it

into

position

at

the

bottom

and

top

of

the

chassis.

4.

Go

to

installation”

Replacing

the

power

supply

Attention:

Do

not

remove

the

computer

cover

or

attempt

any

repair

before

reading

the

“Important

safety

information”

in

the

Quick

Reference

that

was

included

with

your

computer

or

in

the

Hardware

Maintenance

Manual

(HMM)

for

the

computer.

To

obtain

copies

of

the

Quick

Reference

or

HMM,

go

to

http://www.ibm.com/pc/support.

Note:

You

will

need

a

phillips

screwdriver.

1.

Remove

the

computer

cover.

See

Note:

For

this

procedure,

it

helps

to

lay

the

computer

on

its

side.

8

Hardware

Replacement

Guide

Advertising

This manual is related to the following products:

THINKCENTRE 8124, THINKCENTRE 8138, THINKCENTRE 8122, THINKCENTRE 8131, THINKCENTRE 8137

Popular Brands

Popular manuals