Ikelite DSC-W50 User Manual

Ikelite digital housing, Front view, Back view

Advertising
background image

Congratulations on your purchase of an Ikelite Digital Camera

Housing. Ikelite has over 45 years of experience in the underwater

photographic and lighting market. Our products are designed and

built in the USA by Ikelite for both the professional and amateur

photographer.

The clear housing permits instant visual inspection of the camera

and all sealing surfaces as well as complete monitoring of controls

and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for

stability. This housing has been water pressure tested at the

factory to 200’ (60m).

2

3

Front View

Shutter
Release

Lid
Snap

Lens
Port

Power

Zoom

O

Oppeenniinngg tthhee H

Hoouussiinngg

1. Lid Snaps have a LLoocckk. To open, push each Lid Snap Lock

forward and lift as shown. Keep pressure on the Lid Snap so

that it does not fly open

quickly.

Some lid snaps have a lot of

spring tension once they go

over center, so keep a firm

grip on the lid snap. Lid

snaps may be opened one at

a time or simultaneously.

Lift

Push Forward

Lid Snap Lock

4

PPlleeaassee RReeaadd

We suggest that you read this instruction booklet thoroughly

before use. If you are new to underwater photography, be sure

to read the General and Photo Tips sections.

We also suggest that you read the camera manual thoroughly

to have a full understanding of where each camera control is

located and what function each control provides.

PPlleeaassee RReeaadd IIff U

Ussiinngg aann EEVV--CCoonnttrroolllleerr

The EV-Controller used with Ikelite DS Substrobes has two user

settings. One setting is for strobe selection, the other is for

pre-flash or non pre-flash. TThhiiss ccaam

meerraa uusseess pprree--ffllaasshh, thus the

EV-Controller should be set to the pre-flash position when used

with this camera.

IInniittiiaall CCaam

meerraa SSeettuupp

1. Set AF Illuminator to “Off”.

2. Set camera to “P” Program Auto Mode.

3. Set Flash to forced “On” (lightning bolt in LCD).

4. Set ISO to “80”.

5. Set White Balance to “Auto”.

6 Set Metering Mode to “Center”.

7. Set Focus to “Center AF”.

8. Set Red Eye Reduction to “Off”.

H

Hoouussiinngg CCoonnttrroollss

Mode

Delete/Image Size

Menu

Back View

Lanyard

Thumb
Rest

Playback

Control Button

Display

H

Hoouussiinngg CCoonnttrroollss ((ccoonntt..))

Ikelite Digital Housing

i n s t r u c t i o n m a n u a l

#

#66111144..5500 ffoorr SSoonnyy D

DSSCC--W

W5500,, W

W7700

Advertising