InFocus LiteShow DP1200x M1 - Manual (Page 20)

InFocus LiteShow User’s Guide 15
Enable encryption while I’m projecting
The default state for Enable encryption while I’m projecting is disabled (not checked). It allows you to project with
security similar to a cabled computer to projector setup.
When the Enable encryption while I’m projecting option is checked, a six-digit code number displays on the pro-
jected image screen after you click the Project button. You need to enter this code when prompted by a window that
asks you to “Enter the code displayed by the projector your wish to use”. Entering this code ensures that your wireless
projection is secure.
Show Favorites
Checking this box allows the LiteShow Manager to show just the projectors that are set as favorites. Favorites are des-
ignated when you check the Favorites checkbox for a projector in the list window’s Favorites column. When this
option is left unchecked, the Favorites column is not available in the list window.
Settings Window
Note : When discussing “Settings,” keep in mind that the Settings Window options are for the LiteShow adapter, while
the settings in the Preferences box are for your computer.
Clicking the Settings button in the LiteShow Manager causes the Settings window to open. When projecting, the Set-
tings
button is disabled. The Settings window contains two tabs:
• Settings: The settings provided in the Settings tab are: Projector Name, Network Name (IBSS), Channel, and
IP Address . The LiteShow adapter’s default MAC Address is provided as read-only information.
Note : you can choose to obtain an IP address automatically or specify the IP Address, Net Mask, and Gateway.
However, please be aware that setting a static IP address requires that all computers using the LiteShow-enabled
projector must be set to the same range.
• Diagnostics : The Diagnostics tab allows you to check and see if your computer's wireless adapter or USB wireless
adapter is communicating with your LiteShow adapter.