Insignia NS-DPF8IP - Manual (Page 19)

19 www.insigniaproducts.com
8 Press (Back) to end the slideshow and return to the
music playback screen.
Using the remote control to navigate menus on
your iPod or iPhone
You can use the remote control (included) to control media
playback functions and navigate menus on an iPod or
iPhone using the iPod Direct Control mode. In this mode, the
screen of the iPod/iPhone is active and is used as a reference
while navigating menus and selecting media for playback.
To navigate menus on your iPod or iPhone
using iPod Direct Control mode:
1
Plug your iPod or iPhone into the docking connector on
the digital picture frame.
2 Press (HOME) to return to the Home screen.
3 Press or to select iPod, then press ENTER.
4 Press or to select the iPod Direct Control icon,
then press ENTER.
5 Press or to navigate through the menus on the
iPod or iPhone screen, then press ENTER to open a sub
menu.
6 Press (Play/Pause) to play a selected media file.
7 Press (Back) to move backward through the menus.
Notes
- In Direct Control mode, you can also control
your iPod or iPhone manually, just as you would if
it were not plugged into the dock.
- In Direct Control mode, music and videos that
are accessed on the iPod or iPhone will be played
back through the frame. Photos, however, will be
played back on the iPod or iPhone's screen.