Insignia NS-DSC1112SL-CN - Manual (Page 28)

24
NS-DSC1112SL/NS-DSC1112SL-CN Insignia 12 Megapixel Camera
www.insigniaproducts.com
5 Press / or / to highlight Factory Reset.
6 Press / or OK/DISP. A confirmation message
appears.
7 Press / or / to highlight Yes, then press
OK/DISP.
8 Press MENU to close the menu.
Transferring files to a
computer
You can transfer photos and video files to your
computer.
To transfer files to a computer:
1 Connect the camera to a camera using the
supplied USB cable.
2 Turn on the camera. The computer detects the
connection. Your camera's internal memory and
memory card display as removable drives in the
file manager. No image is displayed on the LCD.
Caution
Connecting your camera to a computer using the
USB connector will not recharge your camera's
battery or enhance battery life. Make sure that you
disconnect your camera from the computer and
power down your camera when you are finished
transferring files to your computer.
Note
You can also use a card reader to access the memory
card contents of your camera.