Installing the remote control battery – Insignia 09-0398 User Manual

Page 14

Advertising
background image

14

Insignia NS-ES6112 CD Shelf System with iPod® Dock

www.insigniaproducts.com

3 Reinstall and close the battery compartment and return your shelf

system to the upright position.

Installing the remote control battery

To install the remote control battery:
1
Turn the remote control over to the back side.

2 Push the release tab to the right and pull the battery tray out of the

remote control.

Cautions:

Follow these precau tions when us ing batteries in this device:

• Use only the size and type of batteries specified.
• Make sure that you follow the corre ct polarity as indicated
in the battery compartment when ins talling batteries.
• Reversed batteries may cause damage to the shelf system.
• Do not mix different types of batteries together (for
example, alkaline, rechargeable, and carbon zinc), or
semi-used batteries with fresh ones.
• If your shelf system is not to be used for a long period of
time, remove the batteries to prevent damage or injury from
pos sible battery leakage.
• Do not try to recharge ba tteries not intended to be
recharged, because they can overheat and rupture. (Follow
battery manufacturer’s directions.)
• Do not throw batteries into a fire. Dispose of used batteries
as hazardous was te.

Notes

• The backup batteries are used to provide backup for your
shelf system when AC power adapter is disconnected or
there is a power failure.
• When the battery indicator

appears in the

display, you need to replace the batteries.

Warning

There is a danger of explosion if the battery is not replaced
correctly. Replace with the same or equivalent type battery.

NS-ES6112_09-0398 ENG.fm Page 14 Tuesday, June 16, 2009 3:18 PM

Advertising
This manual is related to the following products: