Insignia ns-ltdvd26 - Manual

NS-LTDVD26
ATTACHING/DETACHING THE DVD UNIT
1. Remove the two screws ①.
2. Remove the DVD cover in the direction of arrow (A).
3. Remove the four screws ②.
4. Disconnect the connection between DVD unit and LCD TV as shown in the illustration.
5. Remove the DVD unit in the direction of arrow (B).
Detaching the DVD unit:
1. Attach the DVD unit in the direction of arrow (C).
2. Connect the connection between DVD unit and LCD TV as shown in the illustration.
3. Fasten the four screws ②.
4. Attach the DVD cover in the direction of arrow (D).
5. Fasten the two screws ①.
Attaching the DVD unit:
www.insignia-products.com
• Before detaching (or attaching) the DVD unit, unplug the AC cord from the AC
input terminal.
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the Display on.
This will prevent it from being damaged.
Before attaching/detaching DVD unit:
①
①
①-- ST4×10
②-- ST3×8
②
②
②
②
(A)
(D)
DVD cover
(B)
(C)
DVD unit