JVC 0207TNH-II-IM - Manual (Page 50)

50
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects
digital channels.
Press the M ENU button
π† To "Sound Adjust"
è To enter
π† To "Optical Out"
è To select "PCM" or "DOLBY DIGITAL"
Press the M ENU button when finished
Notes:
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select
PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 20.
• You cannot output sound from your Optical Output connection if the audio source is from your
HDMI device.
These settings allow you to change and adjust the sound on your television.
Bass – You can increase or decrease the level of low-frequency sound in the TV’s audio with
the bass adjustment.
Treble – Use treble to adjust the level of high-frequency sound in your TV’s audio.
Balance – Adjust the level of sound between the TV’s left and right speakers with the balance
setting.
Press the M ENU button
π† To "Sound Adjust"
è To enter
π† To "Bass", "Treble" or "Balance"
√ ® To adjust the setting
π† To move to the next setting
Press the M ENU button when finished
Notes:
• You can reset all sound adjustments you set at once as the default setting when you select
reset. See page 49.
Sound Adjust
Sound Settings
Adjust the Sound Settings
Optical Out
Sound Adjust
Select Operate BACK MENU Back Exit
Bass
Treble
Balance
Optical Out
Turn On Volume
Volume Limit
0
0
0
PCM
Current
30
Reset
Sound Adjust
Select Operate BACK MENU Back Exit
Bass
Treble
Balance
Optical Out
Turn On Volume
Volume Limit
0
0
0
PCM
Current
30
Reset
LCT2224-001B-A English.indd 50 LCT2224-001B-A English.indd 50 2/20/07 9:25:40 AM 2/20/07 9:25:40 AM