Jackson Chemical Dispensing Unit LT-3 - Manual (Page 26)

21
SECTION 3: PARTS SECTION
HT-1 ASSEMBLY (CONTINUED)
ITEM QTY DESCRIPTION Mfg. No.
1 Complete HT-1 Assembly 5700-002-51-98
1 1 Box, Fiberglass Single Chemical Feeder Pump 5700-031-73-03
2 1 Decal, Warning - Disconnect Power 9905-100-75-93
3 1 Chemical Feeder Pump Motor, 240V, 36 RPM 4320-111-47-47
4 1 Switch, SPST OFF/ON 5930-111-38-21
5 1 Decal, Electrical Schematic 9905-002-51-94
6 1 Decal, HT-1 9905-002-51-97
7 1 Conduit Fitting, 1/2" 90B Plastic 5975-011-45-14
8 1 Tubing, 5/16" ID x 7/16" OD Clear 4720-111-35-34
9 1 Tubing, 3/16" ID x 3/8" OD x 1.6" Long 5700-111-35-33
10 2 Tubing, Plastic 1/4" OD Red 4720-601-12-00
1 Chemical Feeder Pump Assembly, 36 RPM 4320-121-37-10
11 1 Housing, Rear Assy 4320-111-37-09
12 2 Screw, 8-32 x 1/2" Phillips Flat Head 5305-011-37-06
13 2 Screw, 8-32 x 3/8" Phillips Flat Head 5305-011-37-07
14 1 Squeeze Tube 5700-111-35-29
15 1 Anko Roller 4320-111-36-70
16 1 Housing, Front 4320-111-37-08
17 4 Screw, 6-32 x 3/4" Phillips Pan Head 5305-011-37-05
18 2 Stiffener, Tube 5700-002-66-49