JVC TV 13142 - Manual (Page 48)

46
NOTE: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
• Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to copyright laws.
Press the REC button and the
PLAY button simultaneously
on the remote control or the
CONNECTION TO CAMCORDER CONNECTION TO ANOTHER VCR
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown below.
DUPLICATING A VIDEO TAPE
Press the INPUT button twice select AUDIO/
VIDEO input position, The "LINE" will appear on
the screen. Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
LINE
VIDEO OUT AUDIO OUT
PLAYBACK VCR
AUDIO/VIDEO CORD (NOT SUPPLIED)
RECORDING TV/VCR
To AV Jack
To VIDEO/AUDIO IN
AUDIO/VIDEO CORD
(NOT SUPPLIED)
PLAYBACK
CAMCORDER
3 4 5
2 1
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
Press the PLAY button on the
playback VCR. Press the PAUSE button
on the TV/VCR to begin
the duplicating process.
REC button on the TV/VCR, then
press the PAUSE button.
RECORDING TV/VCR
AUDIO IN VIDEO IN
INPUT
REC PLAY PAUSE
PLAY
PAUSE