JVC AV 36D502 - Manual (Page 37)

37
General Items
The On/Off timer lets you program your television to turn itself on or off. You can use it as an alarm
to wake up, to help you remember important programs, or as a decoy when you're not home.
Press the M E N U b u t t o n
To ON/OFF TIMER
To operate (begins with ON TIME)
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
To set the minutes
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ONTIME
To accept OFFTIME and move to CHANNEL
To select channel
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFFTIMER
Choose YES to accept the timer setting, choose NOif you don't wish to accept
To FINISH
To save settings
On/Off Timer
On/Off Timer Note for PIP (D502 models) only.
• The On/Off time cannot be set to locked or guarded channels.
• In order for the On/Off timer to work, the clock must be set.
• After a power interruption, the Timer settings must be reset.
NOTES:
If the television is on when a timed event is about to start a Timer Preview window will appear. The
Timer Preview window will appear in the lower right corner of the screen seven seconds before the
timer is programmed to begin. When the timer activates, the Preview picture will become the main
picture.
D502/302/202 mini-IB 4/5/01 9:40 AM Page 37