Playing back tapes – JVC CA-MXGA77 User Manual

Page 25

Advertising
background image

22

Playing Back Tapes

Playing Back a Tape

1

Press

0 EJECT for the deck you want to use.

2

Put a cassette in, with the exposed part of the
tape down and the side you want to play
facing front.

• You can play back only type I tapes.

3

Close the cassette holder gently.

If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A/B (or A/B on
the remote control).

4

Press TAPE

3

3

3

3

3.

The tape play starts and the tape running
indicator (

3) starts flashing slowly.

When the tape plays to the end, the deck automatically stops.

The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.

To stop during play, press

7.

To operate the other deck, press TAPE A/B (or A/B on the
remote control), then TAPE

3.

To fast-forward the tape, press

¡ (or ¢/¡ on the

remote control). The tape running indicator (

3) starts

flashing quickly.

To rewind the tape, press

1 (or 4/1 on the remote

control). The tape running indicator (

2) starts flashing

quickly.

To remove the cassette, press

0 EJECT for deck A or

EJECT

0 for deck B.

For Deck A

For Deck B

20_22MXGT88&GA77[B].pm6

03.2.8, 9:03 PM

22

Advertising
This manual is related to the following products: