Maintenance, Handling discs – JVC KD-S6060 User Manual

Page 20

Advertising
background image

20

ENGLISH

MAINTENANCE

Handling discs

This unit has been designed to reproduce CDs
and CD-Rs (Recordable).
• This unit is not compatible with MP3 discs.

How to handle discs

When removing a disc
from its case,
press down
the center holder of the case and
lift the disc out, holding
it by the edges.
• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after

use.

To keep discs clean

A dirty disc may not play correctly.
If a disc does become dirty, wipe it
with a soft cloth in a straight line
from center to edge.

To play new discs

New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub
the edges with a pencil or ball-point pen, etc.

Moisture condensation

Moisture may condense on the lens inside the
CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the disc and leave
the unit turned on for a few hours until the
moisture evaporates.

When playing a CD-R

Before playing back CD-Rs, read their instructions
or cautions carefully.
• Use only “finalized” CD-Rs.
• Some CD-Rs may not play back on this unit

because of their disc characteristics, and for
the following reasons:
– Discs are dirty or scratched.
– Moisture condensation on the lens inside the

unit.

– The pickup lens inside the unit is dirty.

• CD-Rs are susceptible to high temperatures or

high humidity, so do not leave them inside your
car.

• Do not use following CD-Rs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

– Discs on which labels can be directly printed

by an ink jet printer.

Using these discs under high temperatures or
high humidity may cause malfunctions or
damage to discs. For example,
– Stickers or labels may shrink and warp a

disc.

– Stickers or labels may peel off so discs

cannot be ejected.

– Print on discs may get sticky.
Read instructions or cautions about labels and
printable discs carefully.

• CD-RWs (Rewritable) cannot be played back

on this unit.

CAUTIONS:

• Do not insert 8 cm discs (single CDs) into the

loading slot. (Such discs cannot be ejected.)

• Do not insert any disc of unusual shape—like a

heart or flower; otherwise, it will cause a
malfunction.

• Do not expose discs to direct sunlight or any

heat source or place them in a place subject to
high temperature and humidity. Do not leave
them in a car.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.

Center holder

Warped
disc

Sticker

Sticker
residue

Disc

Stick-on
label

EN19-21KD-S6060[E_EX]f.p65

7/28/03, 5:43 PM

20

Advertising