Searching for a station manually: manual search – JVC KD-S6060 User Manual

Page 8

Advertising
background image

8

ENGLISH

Searching for a station manually:
Manual search

1

Select the band (FM1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.

2

Press and hold

¢ or 4

until “M” (manual) starts flashing on
the display.

3

Tune in to a station you want while
“M” (manual) is flashing.

• If you release your finger from the button,

the manual mode will automatically turns
off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM—MW/LW) until
you release the button.

When an FM stereo broadcast is hard to
receive:

1

Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.

2

Press MO (monaural), while
still in the functions mode, so
that the MO indicator lights up
on the display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.

When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.

To tune in to stations of lower
frequencies

To tune in to stations of higher
frequencies

FM1

FM2

FM3

AM

FM

AM

MODE

8 MO

MO (monaural) indicator

MO

EN07-10KD-S6060[E_EX]f.p65

7/28/03, 5:41 PM

8

Advertising