JVC LVT1000-004A - Manual (Page 10)

7
ADJUSTING THE SOUND
Volume adjustment
To increase the volume
Turn JOG VOLUME clockwise (or press VOL
5 on the remote control unit).
To decrease the volume
Turn JOG VOLUME counterclockwise (or
press VOL
∞ on the remote control unit).
Caution
Do not turn off the unit with the volume set to an
extremely high level; otherwise a sudden blast of sound
might be produced damaging your hearing and/or the
speakers, when you turn on the unit next time or start
playing another source.
Listening through headphones
Connect a pair of headphones to the PHONES
jack.
Use commercially available 3.5-mm stereo mini
headphones (16
Ω
to 32
Ω
).
No sound comes out of the speakers when headphones
are connected.
Cautions
• Turn down the volume before connecting headphones
and keep the volume level low; as listening at high
volumes could damage your hearing.
• Do not drive while listening through headphones.
Changing the EQ (equalizer) setting
The unit has several preset EQ (equalizer) settings so
that you can select one that most matches the type of
music being played.
Press PRESET EQ (or EQ on the remote control
unit) repeatedly.
Each time you press the button, the EQ setting changes
as shown below.
ROCK JAZZ POP
CLASSIC FLAT
Reinforcing the bass sound
You can enjoy powerful bass sound by turning on the
Hyper-Bass Sound effect.
Press HYPER-BASS SOUND (or HBS on the
remote control unit).
When the Hyper-Bass Sound effect is turned on, the HBS
indicator lights up in the display window.
To turn off the effect
Press the same button again so that the HBS indicator
goes off.
TUNER
PROGRAM
FM MODE
HBS EQ
RANDOM
VOL
INTRO PRESET/
REPEAT
TAPE CD
JOG VOLUME
PRESET EQ HYPER-BASS SOUND
PHONES HBS VOL /
EQ
02_01-18_RCST3SL_B_En.p65 2/4/03, 2:38 PM 7