JVC LPT1092-001A - Manual (Page 29)

Masterpage:Right0
EN
29
Filename [MV5S_08Basic TimerDub.fm]
Page 29Saturday, 9 July 2005 13:44
TIMER RECORDING
You can programme each deck to timer-record as many as
8 programmes up to 30 days ahead.
With the S
HOW V IEW system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
HOW V IEW number.
NOTES:
● There may be cases that the S
HOW V IEW Timer Programming function
prolongs the stop time of the programming.
● When two successive programmes are recorded on a DVD-RW disc
with the S HOW V IEW Timer Programming function, the beginning of the
second one may be left off the recording.
● S
HOW V IEW Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
● If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
● To record the programmes received by the satellite receiver, record
on the DVD discs. For details, refer to “Satellite Receiver Users (DVD
Deck Only)” above.
1
Press DVD or VHS to select the deck on which you want to
perform timer programming.
2
For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3
Press SHOWVIEW to access the S HOW V IEW screen.
4
Press the number buttons to
enter the S HOW V IEW number of a
programme you wish to record,
then press ENTER.
● If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
● To clear all entered numbers at a
time, press CLEAR (8).
● If the number you entered is
invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO.
THEN RETRY” appears on the TV screen. Input a valid S
HOW V IEW
number.
● If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen,
set Guide Program numbers manually. (
੬ pg. 83)
● When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some
of the reserved programmes. (
੬ pg. 34)
5
The S HOW V IEW number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
● To cancel this setting, press RETURN.
6
Press w e to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
● “STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
● “DAILY/WEEKLY” ( ੬ pg. 30, “Weekly/Daily Recording”)
● “VPS/PDC” ( ੬ pg. 30, “VPS/PDC Recording”)
● “REC MODE” ( ੬ pg. 27, 28, “Recording Mode”)
● “NAME” ( ੬ pg. 67, “Modify Title Name”) (DVD deck only)
7
Press ENTER to access the Programme Confirmation screen.
8
Press ENTER to complete timer programming.
● To programme another timer, repeat steps 3 – 8.
● If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 35.
9
Press TIMER # to engage the unit’s timer mode. The DVD timer
indicator lights up on the unit and the unit is automatically turned
off.
● To disengage the timer mode, press TIMER # again.
S
HOW
V
IEW
™ Timer Programming
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the S
HOW V IEW programme screen in step 5. When
this happens, set the correct Guide Program number for that station.
(
੬ pg. 83, “S
HOW V IEW TM System Setup”)
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the S
HOW V IEW
system:
A Perform “S
HOW V IEW ™ Timer Programming”.
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Leave the satellite receiver’s power on.
ENTER
CLEAR ( )
DVD
0 – 9
VHS
CANCEL
SHOWVIEW TIMER
RETURN
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW V IEW
TM System Setup” ( ੬ pg. 83) and
set the Guide Program number correctly.
1 2 3
4 5 6
7 8 9
0
SP
1 2 3 4
SHOWVIEW PRGM
DATE START STOP TV PROG
DAILY/WEEKLY VPS/PDC
ON
NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER] OK
REC MODE
SHOWVIEW NO.
MV5S_08Basic TimerDub.fm Page 29 Saturday, July 9, 2005 1:45 PM