Playback, Basic playback – JVC HR-J6609UM User Manual
Page 7
OR
Press REW (
) or FF
(
) repeatedly on
the VCR.
Press REW (
) or FF
(
) repeatedly on the
Remote.
• Press PLAY (
) to resume
normal playback.
• Each time you press REW
(
) or FF (
) the
playback speed changes.
Variable speed search
Make sure the window side is up, the rear
label side is facing you and the arrow on
the front of the cassette is pointing
towards the VCR.
VIDEO (MONO) L – AUDIO – R
POWER
CH
REC
REW
PLAY
FF
STOP/EJECT
Basic Playback
Load a cassette
Playback
OR
Press STOP/EJECT (■/
) on the VCR.
OR
Press Play (
) on the
VCR.
1
2
• Do not apply too much pressure when
inserting.
• The VCR turns on, and the counter on
the on-screen display is reset, automatically.
• If the cassette’s record safety tab has been removed, playback
begins automatically.
Start playback
Press PLAY (
).
During playback
Stop playback
Press STOP (
) on the
Remote.
Pause playback and view still picture
Press PAUSE.
• Press PLAY (
) to resume
normal playback.
Pause and Frame-by-Frame playback
Press PAUSE to pause, then
press PAUSE repeatedly.
Press PLAY (
) to resume
normal playback.
Slow-motion
Press PLAY (
) on the
Remote.
• Playback will proceed at
1/10 th of the normal speed.
• Press PLAY (
) to resume
normal playback.
Speed search
Press REW (
) or FF
(
) on the Remote.
• Press PLAY (
) to resume
normal playback.
OR
Press REW (
) or
FF
(
) on the VCR.
OR
Press REW (
) or FF
(
) on the VCR.
OR
Press POWER (
/l
) on
the VCR.
Press POWER on the
Remote.
Press STOP/EJECT (■/ ) on
the VCR.
• You can also eject the
cassette when the VCR is
turned off.
Press REW (
) or FF
(
) on the Remote.
When the tape is not running
Rewind/fast-forward
Eject the tape
Turn off the VCR
NOTE:
During slow motion picture, some noise might appear on
the TV screen. Use the SET–/+ on the Remote to eliminate
the noise.
TAPE SPEED
PICTURE SEARCH SPEED
PRESS ONCE
PRESS TWICE
SP
EP
3X
9X
5X
15X
4F22001AE Cov-07
16/01/2002, 19:06
7