Ice maker safety installation instructions, Danger warning, Important safety instructions – Jenn-Air W10136129C User Manual

Page 3: Save these instructions, Tools and parts, Custom panel dimensions, Warning

Advertising
background image

3

ICE MAKER SAFETY

INSTALLATION INSTRUCTIONS

Tools and Parts

TOOLS NEEDED:

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed
here.

PARTS NEEDED:

Custom Overlay Door Panel—See “Custom Panel Installation
Instructions,” #8 x

¹⁄₂" pan head wood screws (8)

PARTS SUPPLIED:

Adhesive pads (4)

Custom Panel Dimensions

If you plan to install a custom overlay panel, you will need to
create the panel yourself or consult a qualified cabinetmaker or
carpenter.

IMPORTANT:

The thickness of the overlay panel must be

³⁄₄" (1.91 cm).

Overlay panel must not weigh more than 8 lbs (3.62 kg).

Overlay panels weighing more than recommended may
cause damage to your ice maker.

Match woodgrain direction with that of adjacent cabinets.

Sand panel edges to provide a smooth finish.

Use moisture sealer on both sides and all edges of the
panel to provide moisture protection.

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING

: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic

precautions:

SAVE THESE INSTRUCTIONS

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Disconnect power before cleaning.

Disconnect power before servicing.

Replace all parts and panels before operating.

Use two or more people to move and install ice maker.

Cordless drill

Phillips screwdriver

Router or planer

Pencil

Masking tape

Tape measure

Towel or piece of
cardboard

Advertising